Anytone AT-Firmware Update + PC Alignment Software

 

Now available on the Anytone website are the very latest firmware update and PC alignment files.

I suggest that you read the instructions carefully and proceed with caution as you don't want to brick your shiny new radio!

Also note:

The Anytone PC Alignment (service mode) software tool for the AT-6666 PRO, is designed for the professional radio market. This tool is intended for use by qualified radio service providers only, and requires the use of radio test equipment.

LINK: CLICK HERE

CHANGELOG:

 V1.01 (QX6666P_H_V101_20240920) 

- Add MEMORY copy to VFO feature. (Press BAND while in MEM mode to copy the frequency and settings to VFO (uF) mode). 

- Stop the overwriting of saved MEMORY channels. (Changes to saved MEMORY channels are temporary). 

- Add TXCOLOR menu item. (Allows setting of a different LCD backlight color in TX mode).

- Add SCAN to the PF.KEY selection list. 

- Add CW.RX menu item. (Allows setting of CW-U (USB) and CW-L (LSB) modes). 

- Add CW.BKIN menu item. (Allows setting of the CW break-in delay from 0-1000ms). 

- Add CW.SHIF menu item. (Setting "ON" will shift/offset the RX frequency in CW mode to the value set in the CW.FREQ menu. This will set the CW RX tone and CW TX sidetone to the same frequency, automatically).

- Add support for the PC Alignment (service mode) software tool.

- Add Firmware Version menu item (VER.xxx).