Ailunce HD1 Firmware Update (August 2018)

Ailunce HD1 Software v1.98 and Firmware V1.53

1. Radio screen can display below 4 modes.

Display VFO-A | VFO-B

Display VFO-A | CH-B

Display CH-A | VFO-B

Display CH-A | CH-B

2. Add Mic Gain setting on the radio.

3. Add Mic gain internal value and internal protection

4. Add Talk permit tone, Channel free tone, Repeater connect tone, repeater fails tone.

5. Add permit tone select on-off for analogue and digital

6. Repeater tone is free from beep restrictions.

7. Set the GPS report contacts on the radio.

8. Show TS1 or TS2 on the radio main screen.

9. Add “No RX Info when operating Menu”, Radio can check if you are in the menu to judge display the RX info or not.

10. Add functions for Side key setting

Zone Plus

Zone Minus

DMR Slot

Promiscuous

Manual Dial

Ch-Mode.

11.Improve the squelch function

12. Address when setting the CTCSS, after the first time receives, there will no audio when a signal is coming, unless you press PTT again.

13. An issued problem when a Channel Alias in only imported if it’s numbers. If it is text then the imported field is just blank.

14. The new software and firmware are more stable with a connection to the computer.

Software/Firmware can be downloaded from http://www.retevis.com/hd1-resources/