1 February 2017

Uniden Bearcat UBC-D3600XLT @ Nevada


Nevada now have the new Uniden Bearcat UBC-D3600XLT Analogue/Digital scanner in stock. Priced at £425 it boasts a whole heap of features:

Features, Functions & Specifications :-

Favorites Scan 
Allows you to organize your Systems into Favorites Lists. The scanner will scan multiple Favorites Lists and Full Database at the same time.

4 GB microSD card (provided - 1 GB up to 32 GB supported) 
For storing Favorites Lists, Profiles, all settings, Discovery sessions, recording sessions.

Location Based Scanning 
Connect to a GPS receiver (not included) for precise system selection and continuing reselection when you travel. The scanner can automatically Avoid and Unavoid Systems and Departments based on your current location as provided by an external GPS unit.

Range Control 
Lets you set how far out from your current location the scanner will search for channels in Favorites Lists. Location precision for departments and sites that allows you to define a location and range using rectangles instead just of a single circle.

Trunk Tracker V Operation 
Scans APCO 25 Phase 1 and Phase 2, DMR, Motorola, EDACS, EDACS ProVoice, and LTR trunked systems, as well as conventional analog and P25 digital channels.

Multi-Site Trunking 
Lets you program the scanner to share trunked system IDs across multiple sites without duplicating IDs.

Control Channel Only Scanning 
With Motorola trunking frequencies, you do not have to program voice channel frequencies.

Instant Replay 
Plays back up to 240 seconds (4 minutes) of the most recent transmissions.

Audio Recording 
Capture transmissions for later playback.

Custom Alerts
You can program your scanner to alert when you receive, a Channel or Unit ID, a Close Call hit, an ID is transmitted with an Emergency Alert, or a Tone-out hit. For each alert in the scanner, you can select from 9 different tone patterns, 15 volume settings, 7 colors, and 2 flash patterns.

Multicolor LED Alert 
The alert LED with 7 colours, Blue, Red, Magenta, Green, Cyan, Yellow, or White, can be used with your Custom Alerts.

Trunking Discovery 
Monitors system traffic on a trunked radio system to find unknown IDs and automatically records audio from and logs new channels for later review and identification.

Conventional Discovery 
Searches a range of frequencies to find unknown frequencies and automatically records audio from and logs new channels for later review and identification.

Scan by Service Types 
Scan your channels by Service Type i.e. Fire, Police, Railroad, etc.

Search Speed 
80 step/sec. (typical) in Search mode (max) except for 5 kHz steps. 250 step/sec. (typical) in Search mode (max) ? (Turbo Search) for 5 kHz steps.

Multi-Level Display and Keypad light 
Makes the display and keypad easy to see in dim light with three light levels.

Temporary or Permanent Avoid 
For Systems/Sites/Departments/Channels.

System/Channel Number Tagging 
Number tags allow you to quickly navigate to a specific Favorites List, System, or Channel.

Start-up Configuration 
You can program each of your Favorites Lists with a Startup Key (0-9) so that when you power up the scanner and press the key number, just those Favorites Lists assigned to the key will be enabled for scan.

Close Call© RF Capture Technology 
Lets you set the scanner so it detects and provides information about nearby radio transmissions. Close Call Do-not-Disturb checks for Close Call activity in between channel reception so active channels are not interrupted.

Broadcast Screen
Allows the scanner to ignore hits in search and Close Call modes. You can also program up to 10 custom frequency ranges that the scanner will ignore.

Fire Tone-Out Standby/Tone Search 
Lets you set the scanner to alert you if a two-tone sequential page is transmitted. You can set up to 32 Tone-Outs. The scanner will also search and display unknown tones.

PC Programming 
Use the Sentinel software to manage your scanners Profiles, Favorites Lists, and firmware updates.

Analogue and Digital AGC 
Helps automatically balance the volume level between different radio systems.

Priority/Priority w/DND Scan 
Priority channels let you keep track of activity on your most important channels while monitoring other channels for transmissions.

Priority ID Scan 
Allows you to set priority to talkgroup IDs.

Intermediate Frequency Exchange 
Changes the IF used for a selected channel/frequency to help avoid image and other mixer-product interference on a frequency.

Individual Channel Volume Offset 
Allows you to adjust the volume offset for each channel.

Configurable Band Defaults 
Allows you to set the step (5, 6.25, 7.5, 8.33, 10, 12.5,15, 20, 25, 50 or 100 kHz) and modulation (AM, FM, NFM, WFM, or FMB) for 31 different bands.

Adjustable Scan/Search Delay/Resume 
Set a delay up to 30 seconds or a forced resume up to 10 seconds for each channel or search.

Data Naming 
Allows you to name each Favorites List, System, Site, Department, Channel, ID, Location and Custom Search, using up to 64 characters.

Duplicate Input Alert 
Alerts you if you try to enter a duplicate name or frequency already stored in the scanner.

100 Quick Keys 
You can scan Favorites Lists, Systems, and Departments by assigning them to quick keys.

Search Avoids 
You can temporarily Avoid up to 250 frequencies and permanently 
Avoid up to 250 frequencies in any Search mode or Close Call mode.

10 Custom Searches 
Lets you program up to 10 custom search ranges.

Search with Scan Operation 
Lets you include Custom Search ranges during scan operation.

3 Search Keys 
You can assign 3 of the number keys to start a Custom Search, Tone-Out Search, or Close Call Search.

Quick Search 
Lets you enter a frequency and start searching.

Built-in Battery Charger 
Allows you to charge the batteries in the scanner.



Nevada Website: CLICK HERE